Safety Max Lifting Height 450M Building Construction Hoist
Building Construction Hoist Introduction :
Construction lifter is mainly used to transport people or goods to
multistoried building.Buwidely applies to such construction sites
as industrial and civil architecture,bridge,underground,large
chimney,and ship industry,etc.
Construction lifter has such advantages as steady property, safety,
reliability, flexible carrying, and good adaptability, etc.,
improves working efficiency, and can reduce working intensity.
Building Construction Hoist Configuration
There is a electrical small crane available to facilitate the
assembly of the construction elevator.
There is the additional 'C' door at cage side for convenient
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency
Drive (VFD), with low starting current and much less wear and tear,
very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
There is LED lighting inside construction elevator car.
Building Construction Hoist Technical Data
|Item & Article No.||SC200BD, MP-B05; SC200/200BD, MP-B06 Building Construction Hoist|
|Payload Capacity||2,000 KG per Cage|
|Lifting Speed||0–36 m/min.|
|Max. Lifting Height||450 m|
|Cage Size (internal)||3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage|
|Cage Doors||3 doors, Entry Door + Exit Door + Side Door|
|Motor Control||FC (Frequency Control)|
|Engine Power||2x11 KW per Cage|
|Safety Device Type||Centrifugal Brake|
|Power Supply Range||380–500 V, 50 or 60 Hz, 3 Phase|
|Type of Mast||Square Column 650*650 mm with Bolted Rack|
|Length Mast Section||1.508 m|